Užklausimas
Krepšelis
Krepšelis tuščias
Paieška

DĖMESIO!

RCDalys.lt Vilniaus Parduotuvė ATIDARYTA!

VILNIUS S. Žukausko g. 29, Šiaurės miestelis
KAUNAS R. Kalantos 98 Petrašiūnai
+37065387491
 info@rcdalys.lt

Vilnius  +370 637 69904

 

Lėktuvai > Elektronika > Varikliai lėktuvams > 35-XX mm   Atgal

KAVAN Brushless Motor C3548-800

Prekės kodas:

KAV30.0268

Turime vietoje, pristatymas kurjeriu/paštomatu sekančią darbo dieną.

42.99

Kaunas: YRA
Vilnius: Galimas atsiėmimas sekančią darbo dieną


Užsakymai pateikti iki 17h išsiunčiami tą pačią darbo dieną, dažniausiai pristatomi sekančią darbo dieną.
Prekės informacija
Gaminio savybės

Brushless outrunner motor for model aircraft: glider 2700g, trainer 2600g, acro 2300g, 3D 1500g, KV800 rpm per V, power supply Lixx 3-5s, shaft 4.0 mm.
KAVAN C series motors are powerful brushless 14-pole outrunner motors with excellent electrical characteristics, sophisticated design and excellent workmanship. They represent a very good choice for powering your hobby-sport models with excellent performance, good efficiency and a favourable price. They are low speed, high torque motors that handle large diameter propellers and climbs without the need for a gearbox.

Motor marking system: CxxYY-zzzz
C - brushless motor - Outrunner
xx - motor diameter in mm
YY - motor length in mm
zzzz - rpm per V, KV

The KAVAN C3548-800 is a brushless motor designed to power models with a flying weight of up to 2700 g, powered by a three to five cell Li-poly battery. It is well suited for models such as EPP "Warbirds" and aerobatic models with a wingspan of 1300-1400 mm, Spitfire EP or Mustang EP from Phoenix, etc.

Motor mounting:The KAVAN C3548-800 is designed for both front and rear mounting. For front mounting behind the motor face, use at least two (opposing) or four M3 bolts that engage the motor face within 4 - 5 mm. The pairs of holes for the fixing screws in the motor face are spaced regularly at 180° on circles of 25 and 19 mm diameter. The motor firewall should be 5 mm Birch aircraft plywood. A rear mounting kit (mounting cross, prop adaptor) is supplied with the motor.

Motor kit includes: motor C3548-800 with cables and with soldered 3.5 mm gold-plated connectors, rear mounting kit, manual.

Supply voltage LiXX cells: 3 - 5 ; RPM/V [RPM/min/V]: 800 ; Max. power (30 s/5S LiPo) [W]: 660 ; No load current (3S) [A]: 2.2 ; Max. peak current (30 s) [A]: 48 ; Diameter [mm]: 35 ; Lenght [mm]: 48 ; Shaft diameter [mm]: 4 ; Weight [g]: 170 ; Nr. of poles: 14 ; Timming [°]: 15 - 25 ; ESC [A] : 50 - 60 ; Sailplane up to Weight [g]: 2700 ; Trainer up to Weight [g]: 2600 ; Acrobat up to Weight [g]: 2300 ; 3d up to Weight [g]: 1500

Powering LiXX cells 3 - 5
RPM/V [rot./min/V] 800
Max. power (30 s/5S LiPo) [W] 660
Open-circuit current (3S) [A] 2.2
Max. peak current (30 s) [A] 48
Diameter [mm] 35
Length [mm] 48
Shaft diameter [mm] 4
Weight [g] 170
Poles count 14
Timing [°] 15 - 25
ESC [A] 50 - 60
Weight of glider (up-to) [g] 2700
Weight of trainer (up-to) [g] 2600
Weight of acrobat (up-to) [g] 2300
Weight of 3D (up-to) [g] 1500
tr>
Recommended propeller 3S: 14-7
4S: 13x6-8
5S: 12x6
Kita informacija