Miniature servester to adjust neutral (pulse width 1.5 ms) up to 3 servos simultaneously and test servo run (signal within 1-2 ms) manually or automatically. Power 4.8-6 V.
Miniature servotester for adjusting neutral up to 3 servos at the same time, and servicing or servicing of electronic speed controllers manually or automatically. The Servotester Mini generates a control signal with pulses with a repetition frequency of 62.5 Hz (16 ms) with a logic level of "1" equal to the supply voltage and has three basic operating modes switched by a button:
Manual positioning of the servo position by means of the knob (control pulse width range 1-2 ms).
Neutral position adjustment - Control pulse width 1.5 ms.
Automatic Serving Motion Testing (1 ms control pulse width).
For servo servo servo power supply, you will need a 4-5 cell NiMH / NiCd battery or a UBEC (5-6 V) power stabilizer. There is no need for additional power supply when testing BEC speed controllers; in the case of non-BEC ("Opto") regulators, an external power source must be connected to the servo unit as for servicing.
Package Contents: Servotester Mini, Instructions.
Power supply 4.8-6.0V
Signal pulse width for neutral 1,5 ms
Range of signal pulse widths (Manual/Auto) 1-2 ms
Dimensions 48x42,5x28,5 mm
Weight 31 g
Airsoftas, Šratasvydis
Akumuliatoriai, pakrovėjai
FPV Dronai
Lėktuvai
RC Automodeliai
Priemonės konstravimui
Valdymai ir imtuvai
FPV Įranga
Naudoti
Laivai Tankai Sraigtasparniai
3D Spausdinimas
Airsoft EU Sandėlys
Aitvarai
Dovanų kuponai
Kompiuterija
Propeleris.lt sandėlis
Servisas
Žaislai
