SA-G12V EBB Carbine Replica
The well-known on the airsoft market Specna
Arms brand presents SA-G series!SA-G
replicas with their level of craftsmanship can compete with replicas by top
manufacturers! G-Series consists of carbines in several interesting
configurations, including models equipped with an integrated scope, bipod or a KeyMod handguard.
The replica, similarly to the original, was made of durable polymer,
metal and, in the most vulnerable places, steel (steel parts include
screws, pins and tactical sling adapters). The replica features a RIS handguard that contains a battery.
The replica is characteristic for its very good alignment of parts
as well as the fact that it was made of matte polymer. The more important
elements were joined with pins. This way specific elements can be changed, for
instance, the magazine well. The receiver of the replica made of solid polymer
features an individual serial number, manufacturer markings and aesthetic fire mode selector symbols. The
top of the replica features, apart from a classic transport handle, a 1.5x
fixed zoom scope. The replica features a stock foldable to the side, which
simplifies the transportation and operating in tight corners. The metal barrel
features a flash hider mounted on a 14 mm CW thread.
The heart of the replica consists of a reinforced LiPo
Ready gearbox V3. Its construction is fully modifiable and
compatible with standard parts so the replica can be freely tuned. Instead of a
typical connector cube, the replica features a micro-contact- it is a
device that significantly increases reaction time of the mechanism to
trigger squeeze, eliminates the risk of contacts burning as well as increases
the rate of fire.
The replica is fully compatible with LiPo
and LiFe batteries. Due to a base muzzle
velocity of ~380 FPS provided by the main spring installed by
default by the manufacturer, the replica is perfect for operating on a medium
range.
The replica features a quick spring release system - Enter
& Convert?. In order to gain the
access to the gearbox, all that is necessary is
to remove the pin located in the latch blocking the stock. In this way, the
access to the main spring guide is
gained, which can be quickly and easily pulled out through the backside of the
gearbox. Due to that system, it is possible to rapidly and quickly adapt the
power of the replica to conditions expected on the playing field without the
necessity to have the access to a workshop or a set of special tools. The
entire spring exchange lasts 45 seconds and requires only a single
screwdriver.
The replica, similarly to the original, was adapted for the use by both left- and right-handed Users thanks to a
double-sided fire mode selector plate.
The replica uses an interesting solution in the form of EBB (Electric Blow
Back) system that sets the bolt carrier into motion, increasing the realism
and bringing it closer to the live firearm original. The system can be easily
disengaged by unscrewing the special guide connecting the piston with the mock
bolt carrier.
The set includes a Hi-Cap magazine with a capacity of up to 350 BBs.
Every replica undergoes, as early as still in the factory, a
pre-delivery inspection validated by a special certificate with a hologram
and an individual serial number assigned to every replica.
The set does not include a battery or a charger.
The set includes:
- replica
- magazine
- vertical grip