GEPRC TAKER F405 BLS 60A V2 STACK

Features
Use mainstream STM32F405 chip
Equipped with the latest 42688-P gyroscope
16M black box storage
Integrated LC filter
Upgrade type-C USB interface
Directly plugged into the DJI Air Unit
With TAKER H60_BLS 60A 4IN1 ESC, the flying feel is silky
Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
12V@2.5A + 5V@3A dual independent BEC
Specifications
GEP-F405-HD V3 Flight Controller
MCU:STM32F405
IMU:ICM42688-P(SPI)
Air Unit Connection:Direct plugging into DJI Air Unit
Black Box:16M onboard
Barometer: BMP280
Motor outputs:M1-M6
USB Interface:Type-C
OSD:BetaFlight OSD w/ AT7456E chip
BEC:5V@3A,12V@2.5A dual BEC
Firmware Target:GEPRCF405
Mounting: 30.5×30.5mm,?4mm hole becomes ?3mm after using a silicone shock-absorbing circle
Input Voltage:3-6S LiPo
UART:6 UARTs
Power Filter:Integrated LC filter
Weight:7.3g
TAKER H60_BLS 60A 4IN1 ESC
Input Voltage: 3-6S Lipo
Ammeter: Support
Continue Current:60A
Burst Current:65A(5 second)
Support Protocol: Dshot 150/300/600
Size:42×45.7mm,hole30.5×30.5mm,?4mm hole becomes ?3mm after using the silicone shock-absorbing ring.
Weight: 14.9g
Target: B_X_30
Includes
1 x Flight Controller

1 x ESC

1 x Capacitor

1 x DJI Air Unit Adapter Cable

1 x Flight Controller Adapter Cable

1 x XT60 Power cable

4 x M3*30 Screws

4 x M3*25 Screws

8 x Nylon nuts

8 x Silicone grommets

2 x sh1.0 4pinsilicone cable

1 x Camera connection cable