Redox 30A EVO Brushless ESC
Universal Electronic Speed Controller Redox EVO 30A for brushless motors designed for use in model airplanes and helicopters.
Programmed quickly with jumpers with a dedicated programming card (Redox Evo program card) or and using the throttle stick in a special programming mode (programming instructions included).
Programmable functions:
Battery type: NiMH + NiCD / LiPo + LiIon (default)
Low voltage cut-off method: Power reduction (default) / Immediate cut-off
Voltage cut-off thresholds: low, medium, high (LiPo 2.8V / 3.0V / 3.2V / cell; NiMH 0% / 60% / 65% of start voltage)
Timing: Auto/Low/High
Throttle curve: soft (default) / linear
Flight Mode (Governor): Off (Default) / Helicopter
Motor rotation direction: regular CW (default) / reverse CCW
Reset brings back the factory default setup
2 brake modes: off - slow down / on instant stop
Dane techniczne:
Length: 45 mm
Width: 25 mm
Height: 9 mm
Weight: 28g
Working voltage: LiPo 2-4s (7.4 - 14.8V) or 5-10 NiXX cells (6 - 12.0V)
max. current [A]: 40A
Constant current [A]: 30A
BEC: 5V/2A
Connectors soldered: 3x gold 3.5mm socket (from the motor) / DEANS plug (battery side)