Užklausimas
Krepšelis
Krepšelis tuščias
Paieška

VILNIUS S. Žukausko g. 29, +37063769904
KAUNAS R. Kalantos g. 98, +37065387491
INTERNETINIAI UŽSAKYMAI +37065387491   info@rcdalys.lt

FPV Įranga > Spektro analizatoriai   Atgal

6GHz SA6 Portable RF Spectrum Analyzer Spectrum Explorer Signal Genertor With Tracking Generator 6.2 GHz With Touchscreen

Prekės kodas:

sa6

Turime vietoje, pristatymas kurjeriu/paštomatu sekančią darbo dieną.

279.99

€

Kaunas: YRA
Vilnius: NĖRA, galimas atsiėmimas sekančią darbo dieną


Užsakymai pateikti iki 17h išsiunčiami tą pačią darbo dieną, dažniausiai pristatomi sekančią darbo dieną.
Prekės informacija
Gaminio savybės

Features:

SA6 is a simple portable spectrum analyzer and signal range designed to display the signal spectrum in the frequency range of 35 to 6200 MHz.

The analyzer identifies the amplitude and frequency of the spectral components of the analyzed process. Spectrum analyzers can process signals from all widely used technologies: Wi Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, etc.

Another important feature is the additional function of the tracking generator, which makes it possible to measure the frequency response of passive or active devices such as filters or amplifiers. This software allows for measuring SWR and return loss modules. This requires an external directional coupler and a set of calibration measures.

SA6 is mainly used for on-site operations. This device is , lightweight, and low in energy consumption. It enables the service center and maintenance team to conduct on-site HF analysis of debugging and repair work.

For example, you can use this device to perform the following actions:

Place the external antenna on the base station

Quick analysis of RF environment

Check if the relay unit is working properly

Repair and adjustment of relays, generators, filters, etc.

Measure SWR when using an external directional coupler.

This device is controlled by one of two methods:

Through the buttons and touch screen on the device.

The data between the analyzer and the PC is transmitted through a USB cable.

All measurement data is displayed in real-time on the device or PC screen.

Material: Metal+Plastic

Color: Black


Specifications:

Display frequency range: 356200MHz

Measurement frequency range: 35-4500MHz

Dynamic range in the 35-3000 MHz frequency : 75 dB3000-4500 MHz dynamic range: 70 dB

Maximum span: 6165MHz

Bandwidth: 200 kHz, fixed

Scan speed for frequencies above 100MHz: 700MHz/sec

Scan 100 MHz:<0.25 seconds

Background noise up to 3000 MHz:<-90 dBm

Background noise 3000-4500 MHz:<-85 dBm

Background noise 4500-6200MHz:<-80 dBm

Wave impedance: 50 ohms

Standing wave ratio within the operating frequency range:<1.5

Internal attenuator: 0-30dB

Error at attenuation up to 10dB: 2dB

10 to 20 dB attenuation error: 5 dB

20 to 30 dB attenuation error: 8 dB

Tracking generator output power: -15... -25 dBm

Accuracy within dynamic range: 2,0 dB

Maximum input power of attenuator at 0dB: 10dBm Maximum input power when attenuation is greater than 20dB:+20dBm

Maximum input measurement signal:+10 dBm

Maximum input DC voltage: 25 volts

Maximum current consumption when operating with batteries: 450 mA

Maximum current consumption when running from USB: 500 A (when charging) Battery: 2500 mA Range time: 3 hours Battery charging time:~5 hours


The package includes:

1*Spectrum analyzer SA6

2*SMA-SMA 30cm extension cable

1*Typc-USB 10cm data cable

1*Stylus

1*SMA-KK Pass
Kita informacija

Įsigiję šią prekę taip pat pirko