Dronai > Dalys ir komponentai > Kontroleriai ir priedai > Kontroleriai (FC) Atgal

Matek F405-WTE ELRS Wing Flight Controller

Matek F405-WTE ELRS Wing Flight Controller

Prekės kodas:

f405-wte

Turime vietoje, pristatymas kurjeriu/paštomatu sekančią darbo dieną.

74.99 €

Kaunas: YRA
Vilnius: Galimas atsiėmimas sekančią darbo dieną

Užsakymai pateikti iki 17h išsiunčiami tą pačią darbo dieną, dažniausiai pristatomi sekančią darbo dieną.

Prekės informacija

Gaminio savybės

The Matek F405 WTE is a fixed wing flight controller compatible with Ardupilot, and iNav. The FC includes a ESP32 module onboard that lets you use this as either a expressLRS (ELRS) 2.4Ghz receiver, or a WiFi telemetry module with Ardupilot (MAVlink). This FC uses the 3rd generation ICM42688-P IMU along with a SPL06-001 Barometer.

FC Specifications

MCU: STM32F405RGT6, 168MHz , 1MB Flash
IMU: ICM42688-P
Baro: SPL06-001
OSD: AT7456E
Blackbox: MicroSD card slot
ESP WiFi Telemetry(MAVLink, 14dBm)
ExpressLRS 2.4G receiver(CRSF protocol, Telemetry 12dBm)
6x UARTs, 1x Softserial_Tx option(INAV)
12x PWM outputs
1x I2C
4x ADC (VBAT, Current, RSSI, Airspeed)
USB/Beep Extender with Type-C(USB2.0)
Dual Camera Inputs switch
9V(12V) for VTX power switch
FC Firmware

ArduPilot: MatekF405-TE
INAV: MATEKF405TE_SD (not available in INAV configurator 4.x)
PDB

Input voltage range: 6.8~30V (2~6S LiPo)
1x ESC power pads
Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot)
Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)
Sense resistor: 90A continuous, 220A peak
BEC 5V output

Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
Continuous current: 2 Amps, Max.3A
BEC 9V /12V output

Designed for Video Transmitter, Camera, Gimbal ect.
Continuous current: 2 Amps, Max.3A
12V option with Jumper pad
for stable 9V/12V output, input voltage should > output voltage +1V
BEC Vx output

Designed for Servos
Voltage adjustable, 5V Default, 6V or 7.2V via jumper
Continuous current: 8 Amps, Max.10A
for stable Vx output, input voltage should > Vx voltage +1V
BEC 3.3V output

Designed for Baro / Compass module and external 3.3V peripherals
Linear Regulator
Continuous current: 200mA
Physical

Mounting: 25 x 25mm, ?2mm
Dimensions: 44 x 29 x 12.7mm
Weight: 22g w/ USB/buzzer adapter

Kita informacija