Užklausimas
Krepšelis
Krepšelis tuščias
Paieška

DĖMESIO!

RCDalys.lt Vilniaus Parduotuvė ATIDARYTA!

Jūsų laukiame adresu S. Žukausko g. 29, Šiaurės miestelis
Kaunas +37065387491
 info@rcdalys.lt

Vilnius  +370 637 69904

 

FPV Įranga > Caddx Walksnail   Atgal

Caddx Walksnail Avatar HD Nano Kit

Prekės kodas:

WN04-6009S

Turime vietoje, pristatymas kurjeriu/paštomatu sekančią darbo dieną.

169.99

Kaunas: YRA
Vilnius: Galimas atsiėmimas sekančią darbo dieną


Užsakymai pateikti iki 17h išsiunčiami tą pačią darbo dieną, dažniausiai pristatomi sekančią darbo dieną.
Prekės informacija
Gaminio savybės


Product features:
1080P resolution, 22ms low latency, Canvas mode, 4km range, Dual antenna, Light weight design, FOV170°, Built-in 8G storage, 6V-25.2V


1080P/60FPS,720P/120FPS
The Avatar HD system uses H.265 code,an industry-leading technology,
to provide 1080p FPV image quality with ultra-low latency.


Dual-antenna Design,4km Long Range
Designed to carry dual antennas to achieve more stable and powerful signals


Single Board Design,16g Light Weight
VTX weights only 16g,designed with single board and 25.5*25.5mm
mounting hole distance,making installation easier.


22ms Low Latency
Supports both high frame rate and standard frame rate,
in high frame rate,it has an average latency of 22ms.


8G Built-in Storage
The Avatar vtx comes with 8g built-in storage it can record 1080p or 720p
HD flight videos without interference.


HD 1080p OLED Dual Micro Displays


Canvas Mode
supports Betaflight, kiss, Inav, Ardu full OSD display and customization,
you can easily adjust the parameters you want by remote control.


Mini Size,46°FoV
The Avatar goggle is designed as lightweight mini
size and 46field of view,allowing pilots to wear it more
comfortably while giving them a more immersive FPV
experience as well.


Focus Adjustment
The goggles have the feature of adjusting the focus without the need to install
corrective lenses.


HDMI Output


Ranging Mode
Turn on the ranging mode to display the distance between the drone
and goggles in real time,in case the drone is lost due to long distance flight.



It is recommended to use a regulated power supply for power supply.If you use a 6S battery,
be sure to install a capacitor at the battery input It is recommended to use the specifications
above 50V/47uF,the voltage ripple is higher than 35V,and the risk of burning the device is high.

Specification
Camera
Model Avatar nano/Avatar camera
Image Sensor 1/2.71nch
Resolution 1080P/60fps,720P/120fps,720P/60fps
Ratio 16/9 4/3
Lens 2.1mm
FOV 170°
Aperture F2.0
Shutter Rolling shutter
Min.Illumination 0.001Lux
Weight 3.5g/6g
Dimensions 14*14*17mm/19*19*22mm
Coaxial Cable 90mm/140mm
VTX
Model Avatar module
Communication Frequency 5.725-5.850GHz
Transmitter Power (EIRP) FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;
MIC:<25dBm
1/O Interface JST1.0*6(Power in)JST1.0*4(USB)
Mounting Holes 25.5*25.5mm
Dimensions 33*33*9.5mm
Storage 8G
Recording 1080p/720p
Weight 16g
Operating Temperature -20-40?
Channels 8
Wide Power Input 6V-25.2V
Supported FC System Betaflight
OSD Canvas mode
Latency Average delay 22ms
Antenna 2(IPEX)
Goggles Antenna
Model Red bird
Polarization LHCP
Bandwidth 5.6GHz-6.0GHZ
Average Gain 1.9dBi
Radiation Efficiency ?97%
VSWR ?1.3
Cross-Polar Rejection -15to-30dB
Connector RP-SMA
Dimension H24.8mm*R15.3mm
Weight 4.2g

Packing List
Avatar HD KIT X1
4 Pin USB Cable X1
6 Pin Power Cable X1
M2x3/4/5mm Screws X4
M1.2x1.5mm Screws X2
Avatar HD Nano KIT X1
4 Pin USB Cable X1
6 Pin Power Cable X1
M2x3/4/5mm Screws X2
M1.2x1.5mm Screws X2
14-19mm Bracket X1
Kita informacija