Užklausimas
Krepšelis
Krepšelis tuščias
Paieška

DĖMESIO!

RCDalys.lt Vilniaus Parduotuvė ATIDARYTA!

Jūsų laukiame adresu S. Žukausko g. 29, Šiaurės miestelis
Kaunas +37065387491
 info@rcdalys.lt

Vilnius  +370 637 69904

 

Valdymai ir imtuvai > Imtuvai, moduliai > ELRS   Atgal

Happymodel ExpressLRS ELRS ES900TX 915MHz Ultra Long Range Transmitter Module

Prekės kodas:

ES900TX

Laikinai neturime

54.99

Kaunas: NĖRA
Vilnius: NĖRA


Užsakymai pateikti iki 17h išsiunčiami tą pačią darbo dieną, dažniausiai pristatomi sekančią darbo dieną.
Prekės informacija
Gaminio savybės

Happymodel ExpressLRS ELRS ES900TX 915MHz Ultra Long Range Transmitter Module

Overview:

ES900TX and ES900RX modules are a set of long-distance 915MHz/868MHz (optional) wireless transmission equipment developed and designed based on open source software ExpressLRS. This set of modules features ultra-long range, stable operation and low latency. This module is compatible with most Opentx remote controllers, especially suitable for RadiomasterTX16S and JumperT12 T16 T18 series remote controllers, basically plug and play. Specially customized heatsink for transmitter module. We also reserved the mounting position for the 2006 fan, which helps the transmitter module work stably under high power conditions.


New ES900TX module with 2006 fan will work automatically when TX power is 250mw.


specification:

ES900TX:

MCU: ESP32 + ESP8285

Dimensions: 55mm*39mm*11mm

Weight: 9.2 grams (TX module only)

Antenna Connector: SMA

VCC input: 5~13v, recommended 5v~9v

Optional RF frequency: 915mhz or 868mhz (EU)

Maximum output power: <33dBm (For >27dBm operation, it is recommended to add a fan for forced cooling)

Wifi update firmware feature for ES900TX will be available shortly.

ExpressLRS firmware is constantly improved and updated, so for the best experience, we highly recommend using the ExpressLRS configurator update firmware.

Configurator: https://github.com/ExpressLRS/ExpressLRS-Configurator/releases

Firmware: https://github.com/ExpressLRS/ExpressLRS/releases


Binding instructions:

- Power on the ES900RX, wait until the ES900RX red LED goes out, then turn off the power immediately and repeat the above steps. After powering on the ES900RX three times, the red LED light will start blinking twice quickly. This means the ES900RX will enter binding mode.

-Insert the ES900TX or ES915TX module into the radio transmitter, select the CRSF protocol from the external RF mode, the ELRS menu will appear from the radio system. Enter ELRS, press Bind, the red LED on the ES900RX module will turn off. Then it starts blinking slowly and finally lights up. This means the bind was successful.


ES900RX firmware update via Wi-Fi procedure:

- If you put ES900RX into bind mode and wait about 1 minute without binding, ES900RX will automatically enter Wi-Fi mode, you can enter password "expresslrs" to connect to Wi-Fi hotpot "ExpressLRS RX" .

- Enter "10.0.0.1" to access the firmware update website, select the correct firmware and click "Update", wait about 1-2 minutes, the update progress will be completed and click "Firmware Update was successful and will restart." is displayed. It means that the update is completed.


Package includes:

ES900TX

1 x ES900TX915MHz module


1x TX915MHz Antenna

1 x Molding JR bay mount case for TX module

1x heatsink

1x adapter wire

1x2006 fan


ES900TX 915MHz:

1 x ES900TX915MHz module

1x TX915MHz Antenna

1 x Molding JR bay mount case for TX module

1x heatsink

1x adapter wire

1x2006 fan


Kita informacija