About this product
The Diatone Mamba F405 MK3 Basic Stack brings BIG power all in a 30.5x30.5 mounting size! This stack can push 50A all while bringing you the latest features!
Features
Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference
The standard flight controller (30.5×30.5) adds a spare pad
Self-recovery insurance to the receiver's 5V power supply
LED signal selection (when Mamba Led system available)
Increased camera VCC power supply pad
TVS instant high voltage protection 30V
BEC short circuit protection
Super Big Soldering Pad
Increased pad area
Updates
When you connect the USB, the receiver and OSD settings can be saved
The pad area of the Mini flight controller (20×20) increased by 140%
Upgraded anti-interference cable
F405 models support F.prot
Added I2C function
Use TypeC
Specifications
MAMBA Basic F405 MK3 FC
BEC: 3.3V 0.5A& 5V 3A ( (System Power)&5V 3A(LED)& 9V 3A
LED Controller: BF LED/MB LED (4 Set 2812 LED)
MCU: 168MHz STM32F45RGT6
Input: 3~6S Lipo (12.6~25.2V)
Blackbox: 16M Flash Memory
MOUNTING: 30.5mm, M3
ESC Soft: Dshot300/600
TVS Protection: Yes
ESC Telemetry: Yes
GYRO: MPU6000
Barometer: Yes
Power Led: Yes
S/F.Port: Yes
Uarts: 6Set
RSSI: Yes
Buzz: Yes
OSD: Yes
MAMBA F50 ESC
INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
CONTINUE CURRENT:50A×4
BURST CURRENT:60A (10S)
MOUNTING: 30.5mm/M3
Target BLHeli_S CH40
SOFT: Dshot300/600
TVS Protection: Yes
BEC: No
Includes
1x Diatone Mamba Basic Stack F405 MK3 FC 50A
1x AMASS Original XT60
2x 16AWG 60mm Cable
1x Mounting Adapter
60x Hard Dampers
40x Soft Dampers
1x Hardware Kit
2x 8pin sh1.0
1x Capacitor
1x DJI 8 Pin