Dronai > Dronai su elektronika Atgal

iFlight Nazgul Evoque F5X HD BNF 6S DJI

Prekės kodas:

FQ11576

Turime vietoje, pristatymas kurjeriu/paštomatu sekančią darbo dieną.

549.99 €

Kaunas: YRA
Vilnius: Galimas atsiėmimas sekančią darbo dieną

Užsakymai pateikti iki 17h išsiunčiami tą pačią darbo dieną, dažniausiai pristatomi sekančią darbo dieną.

Prekės informacija

Gaminio savybės

The secret to ultimate performance is passion

That was the tagline for our newest approach to creating this work of art! Fully protected electronics, fully lit, paired with the latest and greatest electronics we can offer. Months of engineering went into this BNF and any lessons previously learned to ensure that both novice and experienced pilots would enjoy the new Nazgul Evoque from the very first second.

Lightweight Sidewalls - Keep your rig clean

In your early days, did you ever feel like a lawn mower cutting through the grass and cutting and throwing wet grass over and into your flight pile? Well ... those days are over! The new side walls not only protect against moisture, but also protect the interior from impacts that hit small components of your flight controller.

Secured integrated XT60 battery connector - As safe as it gets

Hanging battery plugs ALWAYS find a way into your props, there is always one time that you forgot to secure it properly and almost cut the cord while flying. There was only one way to get rid of this and we think we might have found a solution. The built-in XT60 connector on the back allows you to securely connect your battery and route all of the cables away from your props.

High Performance Electronics - F7 55A Power Stack

Our SucceX Mini F7 TwinG flight controller with Gyro Fusion technology, modern USB Type-C connector, 32 MB Flash for each tuning session and 5 UARTs for any equipment you want to use. Power from the God with our new SucceX Mini 55A ESC packed full of better heat dissipating mosfets and a whole range of SMD capacitors to filter out possible engine noises, next to the pre-soldered, directly installed capacitor right next to your battery cables.

XING2 Performance Motors - The best motors just got better

7075 aluminum bell, 5 mm titanium alloy shaft, durable NSK bearings, centrally slotted magnets for better response and smaller air gaps for higher magnetic flux with increased performance and efficiency. Not to mention the typical XING damping ring between the bell and the bearing to increase durability and smooth your flights.

Lighting - let it be green

360-degree lighting for day and night. Perhaps the nicest BNF out there, but also a practical one. The lower light shows the battery voltage, a quick check gives you an indication of the voltage remaining; Never take off again with an empty battery. Installed LED cables in the side parts and the underside of the arms are also illuminated and give you some style at the next night out.

HD digital experience - Caddx Polar

Equipped with the DJI Digital FPV System with 50mBit transmission for 720P video feed on your DJI FPV Goggles and a range that you never expected with your old analog VTX. We use the new CaddX Vista Polar HD system installed on the back of your quad. The Polar camera offers better image quality than other CaddX cameras. Better performance in low light and more detailed shadows. In daylight similar to the Nebula Pro with improved dynamic range.

Features:

5mm arm design for more durability
Easy swap arms
LED lights up logo
XING-E 2207 motors and NAZGUL 5140 props
5 "version also fits 5.1" propellers
Popular True-X configuration
TPU crash guards

Specification:

- Overall dimensions: 136 * 190 mm
- Geometry: Squashed-X
- Distance from bottom to top: 28 mm
- Arm thickness: 6 mm
- Thickness of the bottom plate: 3 mm
- Thickness of the top plate: 3 mm
- Upper (middle) plate thickness: 3 mm
- XING2 2207 motors (4S / 6S) (Link)
- Nazgul F5 propeller
- Weight: 412g (without battery and GoPro bracket)

FC // SucceX-D Mini F7

- MCU: 216MHz STM32F722
- Gyro: 2x ICM20689
- Black box: 32 MB
- Betaflight OSD: YES
- BEC: 5V 2.5A / 9V 2.5A
- Current sensor scale: 100
- Inverter for SBUS input (UART2-RX)
- Smart Audio & Tramp VTX protocol supported
- Beeper pad: Yes
- RSSI input pad: No.
- UARTs: 5
- Motor outputs: 4
- 8-pin 4in1 controller connection (GND, VBAT, M1, M2, M3, M4, CUR, R5)
- 6-pin DJI air unit connector (R1, GND, R2, T2, GND, 9V)
- BLHeli32 telemetry: yes
- Input voltage: recommended 2-6S, MAX 6S
- Firmware target: IFLIGHT_F722_TWING
- Mounting pattern: 20 * 20mm 3
- Dimensions: 29 * 29mm
- USB Type-C

Controller // SucceX Mini 55A

-Dimension: 31 * 29.5mm
- Mounting holes: 20 * 20mm / ?4mm
- Weight: 10.8 g
- Supports 2-6S lipo input
- MCU: G071
- Constant: 55 amps
- Burst: 60 amps
- Current sensor: yes
- BEC: No.
- Current course: 100
- Support DShot DShot150 / 300/600 / MultiShot / OneShot etc.
- Firmware: BLHeli 32

Kita informacija