iFlight Nazgul5 HD w/Caddx Polar Vista Digital HD System - 6S BNF FPV Dronas
Prekės kodas:
F011011
Laikinai neturime
429.99
€
Kaunas:
NĖRA
Vilnius:
NĖRA
Užsakymai pateikti iki 17h išsiunčiami tą pačią darbo dieną, dažniausiai pristatomi sekančią darbo dieną.
Prekės informacija
Gaminio savybės
Nazgul5 HD is a 5" size BNF (Bind-and-Fly) quadcopter with Caddx Vista Digital HD System on it. We sticked the lighter Caddx Vista on one of our new updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!
HIGHLIGHTS:
- 5mm arm design for more durability
- Easy-Swap arms
- LED illuminated Logo
- XING-E 2207 motors and NAZGUL 5140 props - 5" version also fits 5.1" style propellers - Popular True-X configuration - TPU crash-guards - Fits both 30.5x and 20x stacks
Nazgul5(XL5 V5) frame specs:
SucceX-E F7 45A flight stack XING-E 2207 FPV Motor (6S 1800kv / 4S 2750kv) Wheelbase: 240mm*240mm Body size: 170*170mm Propeller size: 5 inch /5.1 inch FC pattern: 30.5*30.5/20*20 mm FPV cam spacing: 19mm Weight: 400.8g (without battery)
PRE-TUNED & PRE-SETUP:
- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"
Nazgul5 HD Quad BNF Included Components and Parts
Prebuilt and tested Quadcopter 1x Nazgul5(XL5 V5) Frame 1x Caddx Polar Vista Digital HD System Kit 1x Albatross LHCP RP-SMA 5.8g antenna 2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary) 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary) 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)
FC // SucceX-E F7 Flight controller
- MCU: STM32F22RET6 216MHz
- Gyro: 20689
- Baro: DSP310 (Barometer can only be used with Betaflight 4.3.0 and above)
- OSD: IFLIGHT OSD (AT7456E)
- BEC: 5V 2.5A
- BlackBox: 16MB
- Uart: 4*UART(UART1?UART2?UART4?UART5)
- UART1 for VTX HD(for 4-6S Vista,for 4S DJI Air Unit)/AnalogTelemetry
- UART2 for Receiver
- UART4 for Free
- UART5 for ESC Telemetry
- 4×Dshot/PWM outputs
- Smartaudio & IRC Tramp VTX protocol supported
- WS2812 led Strip: Yes
- Bepper: Yes
- Firmware: IFLIGHT_SUCCEX_E_F7
- Outer Size: 36*36mm / 30.5*30.5/?4 mounting
- Weight: 6.9g
ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC
- Dimension: 40*43mm
- Mounting Holes: 30.5*30.5mm/?3mm
- Weight: 14.4g
- Supports 2-6S Lipo input
- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
- Current sensor: YES
- BEC: NO
- Supports: DShot150/300/600/1200/MultiShot/OneShot etc.