RAYTRONIC C50 DC balansuojantis pakrovėjas 500W

Two-channel pocket microprocessor quick-charger with balancer for up to 16-cell NiCd/NiMH, 6-cell LiPo/Li-Ion/LiFe/LiHV or 2–20V Pb batteries. With current 0,1–15A (up to 250W). Discharge: 0,1–3A (up to 12 W). Input: 7–28V. Internal resistance measuring, can be used as 250W stabilised current source with voltage limitation. Incl. programs for DJI intelligent batteries.
Small two-channel charger Raytronic C50 2×250W was designed with an effort to offer a smart charger with high power and simple and intuitive operation. Raytronic C50 allows to charge and discharge common types of batteries (NiCD, NiMH, LiPo, LiFe, LiHV, Li-Ion, Pb), and is also equipped with 6-channel balancers, which provide safe charging of lithium batteries. The charger has a coloured LCD display and programming button and vial, which will provide you with the possibility of comfortable and very clear parameter settings, control, and watching charging/discharging progress.

Besides compact "handful" dimensions and intuitive controls, the following is worth mentioning:

Program for new types of "High voltage" lithium (LiHV) batteries with an output charging voltage up to 4,25V
Powerful balancer with current up to 800 mA
Optional synchronised operation of both channeus for charging a single battery with power up to 500 W
Optional recuperative discharging with high power when charging from a car battery (energy consumed by your charger is used to charge the car battery powering the charger again
Adjustable output voltage for charging and discharging lithium batteries (allows more gentle charging, as liked by pilots, or, conversely, brutal discharging loved by RC car enthusiasts).
Programs for charging intelligent batteries for popular DJI drones.
Main features and parameters overview

Input: 7.28V DC (XT60 connector)
For charging/discharging 1–16cell NiCd/NiMH, 1–6cell Li-Ion/LiPo/LiFe/LiHV or 2–20V Pb batteries
Adjustable charging current (0.1–15.0 A) for each channel
Adjustable discharging current (0.1–3.0 A), or recuperative discharging (0.1–15.0 A) for each channel
Charging power output up to 2x250W/1x500W for synchronous charging
Discharging power output up to 2x12W, up to 2x250W for recuperative discharging
Charging finishing via automatic "Delta-Peak" for NiCd and NiMH batteries
Lithium and Pb batteries are charged via the "constant current/constant voltage" method
Adjustable sensitivity of "Delta-Peak" detection for NiCd/NiMH batteries
Adjustable output voltage for charging and discharging the lithium batteries
Repeated cyclic charging/discharging or discharging/charging operation for NiCd and NiMH batteries, up to 12 cycles
3 lithium battery modes - charging, discharging and charging/discharging for storing. All of this with a balancer or without it.
Finishing of charging after reaching a set time, temperature or supplied charge
Memory for 5 charging/discharging programs
Internal resistance measuring of individual cells
Stabilised DC current source (0.1–15.0 A) with an adjustable voltage limit
Charging programs for intelligent DJI Mavic/Phantom/Inspire batteries
Ports for temperature sensor (sold separately)
USB input (5V/2.1A) for smartphone/tablets/etc. charging
Simple firmware update via USB port
Backlit coloured LCD display with simple and well-arranged menu, parameter overview during charging/discharging
Programming button and vial for simple and intuitive setting and controlling the charger
Warning messages for higher safety - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity etc...
Incorrect polarity and on-input short-circuit protection
Forced-cooling fan
Compact plastic body, very small dimensions
Chargers' both channels are equipped with an output XT60 ports and universal ports for service connectors JST-XH, allowing direct connection of battery power cables and service connectors JST-XH for 2–6S packs. If you are using a pack with XT60 and JST-XH connects, you don't need any additional adaptors and cables. To connect service connectors of other systems you can use standard Sky RC or RC System adaptors.

Note: charger uses output voltage of 2.4V/cell for Pb battery charging - for this reason, it is suitable for charging typical lead-acid batteries (car batteries) and gel batteries with reversible valve. NOT SUITABLE for charging gas-tight gel batteries charged with a maximum of 2.3V/cell.

Package contains:

Raytronic C50 charger
USB cable
Screen protector
User manual

Input voltage (car battery - DC) [V] 7 - 28
Charging current [A] 0.1 - 15
Charging power [W] 250
Discharge current [A] 0.1 - 3
Discharge power [W] 12
Discharge current (with recuperation) [A] 15
Discharge power (with recuperation) [W] 250
Number of channels 2
NiCd [art.] 1 - 16
NiMH [art] 1 - 16
Li-Pol [art.] 1 - 6
Li-Ion [art.] 1 - 6
Li-Fe [cl.] 1 - 6
Li-HV [art] 1 - 6
Pb [article] 1 - 10
Balancer Year
Proud balanceru [mA] 800
Length [mm] 98
Width [mm] 68
Height [mm] 35
Weight [g] 220