Užklausimas
Krepšelis
Krepšelis tuščias
Paieška

DĖMESIO!

RCDalys.lt Vilniaus Parduotuvė ATIDARYTA!

Jūsų laukiame adresu S. Žukausko g. 29, Šiaurės miestelis
Kaunas +37065387491
 info@rcdalys.lt

Vilnius  +370 637 69904

 

Dronai > Rėmai > Rėmai 0-300mm   Atgal

BADGER DJI EDITION 5" BY ARMATTAN

Prekės kodas:

BADGER-DJI-5"

Laikinai neturime

109.90

Kaunas: NĖRA
Vilnius: NĖRA


Užsakymai pateikti iki 17h išsiunčiami tą pačią darbo dieną, dažniausiai pristatomi sekančią darbo dieną.
Prekės informacija
Gaminio savybės

DJI Adaptation
Finding a way to simply fit the DJI technology inside a badger was not something we were too keen about. For one the Badger has no provisions for antenna management, and more importantly the FOV on the DJI cam would have propellers in view of the HD feed and recording. Surely, we could do better than that.

The DJI Badger is adapted to meet all of the above. We modified the lipo top plate, and created custom moulded rubber parts to manage the DJI antennas. We changed the front camera position to remove props from view of the HD feed, and we also made custom 2 sided 3M foams to mount the DJI Air Unit with ease while providing better impact protection. The result is a Badger that appears to have been designed around the DJI technology with all the goodness of Armattan's latest flagship release.


The Cage
This is the newest revision of Armattan's titanium cage; the same as on the Marmotte. And just in case you haven't heard what the perks of this cage are compared to any other, we'll run through them quickly here.

Independent HD camera tilt means there's no need to deal with foam wedges for the front or back of your recording camera.
A wide range of FPV cam tilt options. From 10 degrees to way too much.
1mm FPV-cam savers: these are designed to bend so your camera won't break.
A minimized weight due to a state of the art, 6-axis milling process.
And the best part? All of these perks come on top of the firm mount and incredible protection that you've come to expect from an Armattan product.

The Arms
Since having removable arms is the major draw for this release, we wanted to specifically mention how they work. The arms mount up with two bolts and two sunk-nuts each. The sunk-nuts go straight into the 4mm baseplate, so there's no need to worry about delamination. When installed, the arms meet in the center of the baseplate, further locking down the construction. We're providing you with a remarkably solid, precise product, and we know that you will have full confidence in this frame.

Other Details
This frame comes with tons of other bells and whistles. As you've come to expect, an extended-aluminum rear provides a protected mount. The frame maintains compatibility with 5.5 inch props for those of you who like to ride the line, and the long body means you can more easily fit an HD camera and a bigger lipo, even with high cam tilt. The FC can mount up on either the 30.5mm or 20mm options, and there are even 20mm rear provisions as well for a VTX or any other board.

Add the differences in carbon and the extra hardware, and you're probably expecting this frame to be considerably heavier than the fixed arm version (the Marmotte). Well due to our experience in design and some clever optimization, we've kept the difference down to 15g. You can thank us later.

The Warranty
Full warranty protection. Cage. Carbon. Everything.

Badger Specs
Frame Weight approx. 130 grams
Motor to Motor 236mm
Frame Shape Compressed X
Main Plate Thickness 4mm
Arm Thickness 4mm
Hardware

Steel Bolts
Titanium Cage
Aluminum Standoffs
Motor Mount Pattern 22xx
FC Stack Mount
20mm and 30.5mm compatible

FPV Camera Mount Mini-camera (21mm)
FPV Antenna Mounts Rubber antenna routing grommets
Max Stack Height 20mm
Warrantied Parts All

Recommended Components

Motor Size 2306
ESCs 30a
Prop Size Up to 5.5"
LiPo 4-5S/1500mAh


INCLUDED
Titanium

2x Camera-cage brackets
2x Camera-cage anchors

Hardware

6x 4mm M3 iron bolts
14x 6mm M3 12.9 grade steel bolts
10x 8mm M3 12.9 grade steel bolts
10x 10mm M3 12.9 grade steel bolts
12x Sunknuts
4x 16mm M3 iron bolts
4x 5mm M2 cuphead iron bolts

Aluminum

1x 23mm front standoff
2x 20mm black standoffs
2x tail posts
2x camera savers

Nylon

4x 6mm M3 standoffs
4x nuts
4x M2 washers
Carbon Fiber
1x 2mm Top (LiPo) plate
1x 1.5mm HD Cam plate
1x 4mm Main plate

Other

1x Lipo strap
1x LiPo foam pad
1x Air unit adhesive foam pad
1x HD camera foam pad
4x Dog-bone landing pads
2x Rubber antenna grommets
1x Diamond-coated steel file
1x Build instructions
Kita informacija