Valdymai ir imtuvai > Imtuvai, moduliai > Turnigy Atgal

RadioLink R6DSM 2.4Ghz 10-Ch S.Bus Receiver

Prekės kodas:

RL-R6DSM

Laikinai neturime

24.99 €

Kaunas: NĖRA
Vilnius: NĖRA

Užsakymai pateikti iki 17h išsiunčiami tą pačią darbo dieną, dažniausiai pristatomi sekančią darbo dieną.

Prekės informacija

Gaminio savybės

Features:

1g weight,15*13mm size,micro mini receiver,spciecally designed for mini drone,no burden for your drone
Strong anti-interference,DSSS and FHSS spread spectrum working synchronously
SUBS signal,Precision: 4096, 0.25us per section, servo anti-shake rudder
Suitable for: AT9/ AT9S/ AT10/ AT10II transmitter
Control Distance: 600 meters, the actual distance is related to flying environment

Channel: 10 channels(support SBUS and PPM output)
Working Voltage: 4.8-6V
Working Current: 38-45mA (input voltage:5V)
Dimensions: 15*13mm
Weight:1g
Precision: 4096, 0.25us per section, servo anti-shake rudder
Control Distance: 600 meters, the actual distance is related to flying environment
Suitable for: AT9/ AT9S/ AT10/ AT10II

How to match code with transmitter:

1. Place the transmitter and the receiver close to each other within 1 meters.
2. Turn on the transmitter, then power on the R6DSM
3. Press down and hold the ID SET switch on side of the receiver for over 1 second, LED starts to blink indicating the code matching in progress.
4. When the LED stops blinking means the code matching process complete.
5. Confirm that your servos is responding to your transmitter accordingly.

How to switch signal:

Press the ID SET button (on the side of the receiver) twice promptly (within 1 second), it will toggle the receiver between SBUS and PPM signal modes.

* NOTE:
After binding your receiver to the transmitter, please switch off and on again of your transmitter, to double check that your receiver receives the signal from the transmitter and controlled by the transmitter.

Includes:
1 x receiver R6DSM

Kita informacija