GPX - CA klijai 20g, Vidutiniai

Liquid cyanoacrylate adhesive glue "Joker" with a medium viscosity - within a few to several seconds glues metals, glass, wood, rubbers, plastics (small areas), ceramic surfaces, EPP and other materials. Indispensable for typical model-making works with wood, where it quickly creates a strong, tight and durable binder.

Packed in a round, airtight bottle with an applicator - glue content: 20g.

Due to the medium consistency, the Joker cyanoacrylate glue becomes an excellent, fast and universal adhesive with a very wide spectrum of applications. It is perfect for both typical model-making as well as for home works, regardless of whether the glued surface is porous or smooth, absorbent or does not allow penetration. After application, part of the adhesive will fill the defect and bonds the gap, while the remaining part will remain on the surface, where it will still be possible to attach another element. In model making applications, medium glue is perfect for EPP foams and for everyday work with balsa and other types of wood.

To cure and bond the glued surfaces immediately, we recommend to use this glue together with an activator (accelerator) "Joker" (available in 200ml spray cans), where after application at the gluing site, it will cure the binder and finish the gluing process.

Safety precautions - CA adhesive bonds instantly human skin (and eyes), is highly toxic, and its vapors are harmful to nasal mucosa. The adhesive should not be used by minors and juvenile modellers, unless under the strict supervision and care of an adult.

In case of accidental bonding, you may use the special debonder (also available in our shop) that can quickly and effectively neutralize the adhesive.

The durability of the CA glue depends on the storage temperature. After opening, it is reccomended to keep the glue in the refrigerator or other cool place, not exposed to sunlight or other sources of light or heat.

Shelf life depending on storage temperature:
+ 20 degrees C. - 6 months
+ 5 degrees C. - 12 months
(this no longer applies to glued surfaces)

Note: CA glue, regardless of its density, is not recommended for gluing paper, foamed polystyrene, depron, lightweight polystyrene foam, delicate fibers (and other textile materials), as well as for use in precision plastic modeling, due to the possibility of melting, unwanted hardening or for very delicate surfaces - deformation of the glued surface.