Propeleris.lt sandėlis Atgal

Microduino Core+ ATmega644PA (5V) (Arduino compatible) [138]

Microduino Core+ ATmega644PA (5V) (Arduino compatible) [138]

Prekės kodas:

MIDU0002

Turime vietoje, pristatymas kurjeriu/paštomatu sekančią darbo dieną.

20.00 €

Kaunas: YRA
Vilnius: Galimas atsiėmimas sekančią darbo dieną

Užsakymai pateikti iki 17h išsiunčiami tą pačią darbo dieną, dažniausiai pristatomi sekančią darbo dieną.

Prekės informacija

Gaminio savybės

Description

Microduino-Core+ which is based on Atmel ATmega644PA as the core of the core 8-bit microcontroller development board, is an open source architecture, compatible with Arduino UNO controller module.

Microduino-core+ is characterised by the following features

Using the U-27pin Microduino interface specification, with many interface-compatible peripheral modules and sensors.

The USB serial interface has been split into a serperate module which can be stacked on top of the Microduino Core board allowing the core board to obtain its tiny footprint. Length 25.4mm X Width 27.94mm

The lightweight design gives the Microduino format advantages on size and cost when compared to a standard Arduino Uno.

Microduino is fully compatible with the Arduino development environment (requires extension - see attached file).

Model: Microduino Core+ ATmega644PA

Operating Voltage: 5V

FLASH: 64K

SRAM: 4K

EEPROM: 2K

Clock Frequency: 16MHz

Characteristics

Open source hardware circuit design, compatible with the Arduino development environment programming process.

Just like and Arduino board, sketches can simply be downloaded into the Microduino using a standard ISP download cable, or by USB cable via the addion of the RS232 interface board.

Unified Microduino interface specification, allowing and rich range of peripheral modules to be 'stacked' onto the the Core board for easy expansion.

Specification

Digital I / O digital input / output of 0 ~ 13, A0 ~ A5.

In Microduino-Core, labeled RX0, TX1, D2 ~ D13, A0 ~ A5, 20 ports for the digital input and output ports.

Analogue I / O analogue input ports of A0 ~ A7.

Microduino-Core with 8 analog inputs, respectively A0-A7, each providing a 10-bit resolution (ie 1024 different values).

Support for six channel PWM output ports, respectively, 3,5,6,9,10 and 11 ISP downloads.

MCU TX / RX terminals.

AREF pin.

IIC interface, SDA (A4), SCL (A5).

Two external interrupts, respectively, D2, D3

Kita informacija