Dronai > Dalys ir komponentai > Kontroleriai ir priedai > Kontroleriai (FC) Atgal

Pro Mini Microcontroller 3.3V/8MHz w/Mini USB Adapter [144]

Prekės kodas:

381000038

Turime vietoje, pristatymas kurjeriu/paštomatu sekančią darbo dieną.

28.70 €

Kaunas: YRA
Vilnius: Galimas atsiėmimas sekančią darbo dieną

Užsakymai pateikti iki 17h išsiunčiami tą pačią darbo dieną, dažniausiai pristatomi sekančią darbo dieną.

Prekės informacija

Gaminio savybės

The Pro Mini is a microcontroller board based on the ATmega328. It has14 digital input/output pins (of which 6 can be used as PWM outputs) 6 analog inputs an on-board resonator a reset button and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or breakout board to provide USB power and communication to the board.

The Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.

Mini USB Adapter (included)

This board converts a USB connection into 5 volt TX and RX signals that you can connect straight to the Arduino Mini or other microcontrollers allowing them to talk to the computer. It is based on the FT232RL chip from FTDI (drivers are included with the Arduino software).

Features

ATmega328 running at 8MHz with external resonator (0.5% tolerance)

USB connection off board

Supports auto-reset

3.3V regulator

Max 150mA output

Over current protected

Reverse polarity protected

DC input 3.3V up to 12V

On board Power and Status LEDs

Specs

Operating Voltage: 3.3V

Input Voltage: 3.35 -12V

Digital I/O Pins: 14 (of which 6 provide PWM output)

Analog Input Pins: 6

DC Current per I/O Pin: 40mA

Flash Memory: 16KB (of which 2 KB used by bootloader)

SRAM: 1KB

EEPROM: 512 bytes

Clock Speed: 8MHz

Dimensions: 18x33mm

Weight: 2.3g

Includes

1 x Pro Mini Microcontroller

1 x Mini USB Adapter

Kita informacija