Užklausimas
Krepšelis
Krepšelis tuščias
Paieška

DĖMESIO!

RCDalys.lt Vilniaus Parduotuvė ATIDARYTA!

VILNIUS S. Žukausko g. 29, Šiaurės miestelis
KAUNAS R. Kalantos 98 Petrašiūnai
+37065387491
 info@rcdalys.lt

Vilnius  +370 637 69904

 

Lėktuvai > Elektronika > Varikliai lėktuvams > Bell tipo   Atgal

hexTronik DT750 750KV bešepetėlinis variklis [242]

Prekės kodas:

DT750

Turime vietoje, pristatymas kurjeriu/paštomatu sekančią darbo dieną.

22.99

Kaunas: YRA
Vilnius: Galimas atsiėmimas sekančią darbo dieną


Užsakymai pateikti iki 17h išsiunčiami tą pačią darbo dieną, dažniausiai pristatomi sekančią darbo dieną.
Prekės informacija
Gaminio savybės

Looks can be deceiving. This outrunner is around twice the size of a towerpro bell motor, and swings a much larger prop. Its the motor used on some of Art-techs new plane kits, which is testiment to its durability, ease of use and quality. The DT700 will swing an 11x4.7 SF prop nicely, to produce more than 900g of thrust. Its great for larger GWS foamies or parkfly planes.


Spec


Required Voltage: 11.1v

Suggested Battery Capacity: 1300mAh +

Suggested Prop: 11x3.8 or 11x4.7

Max current draw: 18A (with 11x4.7 prop)

Max thrust: 1000g+

No Load Current: 1.4A

Shaft: 4M (perfectly suited to Towerpor/GWS SF Slow Fly props)

Weight: 78g

Diameter: 41mm

Overall length: 77mm

Kv: 750rpm/v

Comes with mount as shown in Image


Test Report

We used the DAT700 outrunner to power the an Art-tech Pitts. Run with a 1300mAh 3S1P 20C pack, 18A BESC and 1147 GWS/Towerpro prop, the Art-tech pitts ran nicely. Excellent climb rate, though not hoverable, and with 13 minute flight times or more, we were very impressed. A very efficient outrunner for slower flying models of up to .15 size.
Kita informacija