Note: The STM32F722 generates much heat, please leave at least 5mm on both sides of the FC to give good air circulation.
Diatone's Mamba series gives racers an edge in competition. The latest F7 processing technology with rock-solid power from the ESC means you can focus on flying, not on the limits of your equipment.
With a wide range of setup options and features, you can configure your stack however you'd like. It even has a dedicated LED controller and broken out LED pads for easy hookup. (LEDs not included)
Looking for the same power in a smaller package? 20x20 version here.
Specifications
F722 Flight Controller
MCU: 216MHz STM32F722RET6 32BIT
IMU: MPU6000
Baro: No
OSD: BF OSD
Blackbox: 16M Flash Memory
Uarts: 6Set
ESC Protocol: Dshot300/600/1200
ESC Telemetry: RX6
LED: Blue & Orange for FC Status, Green 9V, White 5V, Red 3.3V
Controller: 4 Set 2812 LED
Bluetooth: SpeedyBee APP
Smartaudio: Yes
RSSI: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25V)
VTS Protection: Yes
BEC: 5V 2A & 9V 2A (Max 3A)
ESC
Input Voltage: 3-6S Lipo (12.6V-25V)
Continuous Current: 50A×4
Burst Current: 55A (10S)
BEC: No
Protocol: Dshot300/600/1200
Mounting: 30.5mm/M3
Supply: Panasonic High-Frequency 470uF/35V
Other
FC Firmware: BetaFlight
Target: MAMBA F722 Download Link
Physical
Mounting: 30.5×30.5mm, ?3
Dimensions: 48 x 36.5 x 11mm
Weight: 22g total
1x Diatone Mamba F722S 30x30 Flight Controller
1x Diatone Mamba 506 3-6S 50A 30x30 4-in-1 ESC
1x Protective Top Plate
1x XT60 Connector
2x 4-in-1 ESC Connector Cable
1x Panasonic High-Frequency 470uF/35V Capacitor
1x Bag of Silicone O-Rings