Miniature servester to adjust neutral (pulse width 1.5 ms) up to 3 servos simultaneously and test servo run (signal within 1-2 ms) manually or automatically. Power 4.8-6 V.
Miniature servotester for adjusting neutral up to 3 servos at the same time, and servicing or servicing of electronic speed controllers manually or automatically. The Servotester Mini generates a control signal with pulses with a repetition frequency of 62.5 Hz (16 ms) with a logic level of "1" equal to the supply voltage and has three basic operating modes switched by a button:
Manual positioning of the servo position by means of the knob (control pulse width range 1-2 ms).
Neutral position adjustment - Control pulse width 1.5 ms.
Automatic Serving Motion Testing (1 ms control pulse width).
For servo servo servo power supply, you will need a 4-5 cell NiMH / NiCd battery or a UBEC (5-6 V) power stabilizer. There is no need for additional power supply when testing BEC speed controllers; in the case of non-BEC ("Opto") regulators, an external power source must be connected to the servo unit as for servicing.
Package Contents: Servotester Mini, Instructions.
Power supply 4.8-6.0V
Signal pulse width for neutral 1,5 ms
Range of signal pulse widths (Manual/Auto) 1-2 ms
Dimensions 48x42,5x28,5 mm
Weight 31 g