Wheelbase for more than 700 six-axis eight-axis aerial vehicle use. Note that part of the rack requires its own drilling installations.
It has the following advantages:
1: PTZ can sink installation, avoid flying at high speed to take the machine arm.
2: PTZ large longitudinal mounting position adjustment in the aircraft, the weight of the aircraft helpful.
3: The rack itself with shock absorbing structure, aerial better.
4: On the boom with extended mounting plate, more convenient receiver, image transmission, and even flight control to avoid mutual interference.
5: the space between the rack and the center plate height nearly 90mm, 6S15000ma battery can also be installed, and there is enough space for longitudinal adjustment.
6: Arm using 12mm diameter carbon tubes, installation aperture 13.5-22mm. Light weight, high strength hanger bar center distance 155mm fit DJI Z15 Zen series head.
7: The processing of pure carbon intensity 3K higher and more durable.
8: reserved gopro head mount hole a bit more convenient IDY users.
9: The ultra-light weight, assembly Weight: 254 g